Ugira LT
Stainless steel clip (D10-12)
Stainless steel clip (D10-12)
Couldn't load pickup availability
WHAT IS IT?
WHAT IS IT?
Wire/tape holders which can be
fixed on Ugira LT 10 mm and 12 mm diameter calibrated fiberglass posts. Suitable for wire and tape up to 10 mm width.
Color: grey.
Material: stainless steel.
MORE INFO
MORE INFO
- Can be fixed on Ugira LT 10 mm and 12 mm diameter calibrated fiberglass posts.
- Do not recommend to fix it on ribbed posts. Due to unevenness of the surface it can be extremely hard to put holder on to ribbed post.
- Suitable for wire and tape up to 10 mm width.
- Rounded edges protecting the cable.
- WARNING: holders tend to stick together. Have that in mind when removing it from plastic cable.
DELIVERY
DELIVERY
The goods will be delivered using DPD courier services.
Delivery time: 2-5 working days.
There is a possible to pick up your order at: Varpo str. 43, Šunskai, Marijampole mun.
RECOMMENDED HEIGHTS
We can make posts to your desired length. To make it easier for you to choose the right ones, the graphs show the wire and tape heights that farmers usually choose depending on the animals they want to enclose or to protect themselves from.
In the table below, we list post diameter that we recommend choosing depending on the post length.
Recommended heights
|
Post height above ground |
Total length of perimeter post |
Total length of corner post |
Recommended diameter of perimeter post |
Recommended diameter of corner post |
Most often fenced animals |
|
1,40 m |
1,60 m |
1,70 m |
12 mm, 16 mm |
16 mm |
Horses, deers |
|
1,30 m |
1,50 m |
1,60 m |
12 mm, 16 mm |
16 mm |
|
|
1,20 m |
1,40 m |
1,50 m |
12 mm |
16 mm |
Wolves |
|
1,10 m |
1,30 m |
1,40 m |
10 mm, 12 mm |
12 mm, 16 mm |
Goats |
|
1,00 m |
1,20 m |
1,30 m |
10 mm |
12 mm, 16 mm |
Cattle, cows, sheep |
|
0,90 m |
1,10 m |
1,20 m |
10 mm |
12 mm |
|
|
0,80 m |
1,00 m |
1,10 m |
8 mm, 10 mm |
12 mm |
Wild boars |
|
0,60 m |
0,80 m |
0,90 m |
8 mm, 10 mm |
10 mm, 12 mm |
Rabbits, otters |
In the table, total length of the perimeter post is given assuming that 20 cm post is driven into the ground and 30 cm for the corner post. How deep the post should be driven into the ground must be evaluated based on the hardness of the ground. Usually, perimeter post is driven 15-30 cm into ground, corner post – 25-40 cm.